Bioconversion potential of Trichoderma viride HN1 cellulase for a lignocellulosic biomass Saccharum spontaneum

The industrialisation of lignocellulose conversion is impeded by expensive cellulase enzymes required for saccharification in bioethanol production. Current research undertakes cellulase production from pretreated Saccharum spontaneum through Trichoderma viride HN1 under submerged fermentation conditions. Pretreatment of substrate with 2% NaOH resulted in 88% delignification. Maximum cellulase production (2603 ± 16.39 U/mL/min carboxymethyl cellulase and 1393 ± 25.55 U/mL/min FPase) was achieved at 6% substrate at pH 5.0, with 5% inoculum, incubated at 35°C for 120 h of fermentation period. Addition of surfactant, Tween 80 and metal ion Mn⁺², significantly enhanced cellulase yield. This study accounts proficient cellulase yield through process optimisation by exploiting cheaper substrate to escalate their commercial endeavour.     

Effect of alkaline pretreatment on delignification of wheat straw

This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis.     

Determination of hexavalent chromium in traditional Chinese medicines by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method that combined high‐performance liquid chromatography with inductively coupled plasma mass spectrometry has been developed for the determination of hexavalent chromium in traditional Chinese medicines. Hexavalent chromium was extracted using the alkaline solution. The parameters such as the concentration of alkaline and the extraction temperature have been optimized to minimize the interconversion between trivalent chromium and hexavalent chromium. The extracted hexavalent chromium was separated on a weak anion exchange column in isocratic mode, followed by inductively coupled plasma mass spectrometry determination. To obtain a better chromatographic resolution and sensitivity, 75 mM NH₄NO₃ at pH 7 was selected as the mobile phase. The linearity of the proposed method was investigated in the range of 0.2–5.0 μg L^?1 (r² = 0.9999) for hexavalent chromium. The limits of detection and quantitation are 0.1 and 0.3 μg L^?1, respectively. The developed method was successfully applied to the determination of hexavalent chromium in Chloriti lapis and Lumbricus with satisfactory recoveries of 95.8–112.8%.     

Production of polyhydroxyalkanoate from sesame seed wastewater by sequencing batch reactor cultivation process of Haloferax mediterranei

Due to the high cost of bioplastic production, sesame wastewater, generated from the sesame seed hulling process, was investigated to be used as inexpensive and renewable carbon source for the production of biodegradable polyhydroxyalkanoate (PHA) by extreme Haloferax mediterranei. The sesame wastewater (SWW) was hydrolyzed using different concentrations of hydrochloric acid (0.4. 1.00 and 2.00 M) at different period of times (15, 60 and 90 min). The concentration of salt (NaCl) and nitrogen source (NH₄Cl and yeast) required for H. mediterranei cells growth and the accumulation of PHA biopolymer was optimized. A maximum 0.53 g/L concentration of PHA was achieved when the SWW extract media was supplemented with 100 g/L NaCl and 6.0 g/L yeast extract. The cultivation was scaled-up using sequencing batch reactor (SBR) fermentation under non-sterile conditions. The SBR results showed that SWW needs an auxiliary carbon source to obtain high PHA production. Consequently, the system fed with SWW and glucose produced higher PHA (20.9 g/L) than the system fed with SWW.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度。近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取材料,所以新型的高效萃取材料一直是样品前处理研究领域的重要发展方向。该文总结和讨论了近年来新型样品前处理材料在环境污染物分析检测中的研究进展,主要聚焦在石墨烯、氧化石墨烯、碳纳米管、无机气凝胶、有机气凝胶、三嗪基功能材料、三嗪基聚合物、分子印迹聚合物、共价有机框架材料、金属有机框架材料以及它们的功能化萃取材料等。这些材料已经被应用于环境样品中不同类别污染物的萃取富集,如重金属离子、多环芳烃、塑化剂、烷烃、苯酚、氯酚、氯苯、多溴联苯醚、全氟磺酸、全氟羧酸、雌激素、药物残留、农药残留等。这些样品前处理材料具有高的表面积、大量的吸附位点,并涉及多种萃取机理如π-π、静电、疏水、亲水、氢键、卤键等相互作用。基于这些萃取材料的多种样品前处理技术与各类检测方法如色谱、质谱、原子吸收光谱、荧光光谱、离子迁移谱等相结合,已广泛应用于环境污染物的高灵敏分析检测。最后,该文总结了样品前处理发展中存在的问题,并展望了其未来在环境分析中的发展趋势。     

用于食品安全分析样品前处理的共价有机聚合物的制备及应用进展

食品安全关系身体健康和生命安全,是全球关注的热点之一。食品基质复杂,痕量有毒有害物质分析之前必须经过有效的前处理。目前发展的前处理技术如固相萃取、磁固相萃取、固相微萃取等,其关键是吸附介质。共价有机聚合物是一类通过共价键连接而成的有机多孔材料,具有质轻、稳定性好、比表面积大、结构可控、易于修饰等特性,是一类优异的新型吸附材料。该文综述了近年来共价有机聚合物(COPs)在食品安全分析前处理中的应用进展。共价有机聚合物及其功能化复合材料通过简单的装填、聚合反应或化学键合固定到小柱或毛细管柱中用作固相萃取的吸附介质;通过一锅法、原位还原法、原位生长法或共沉淀法生成具有磁性的固相萃取吸附介质;或者通过物理涂覆、化学键合、溶胶凝胶法及原位生长法制备固相微萃取纤维。基于以上高吸附容量共价有机聚合物的样品前处理技术,食品中农残兽残、添加剂、环境污染物及生物毒素等得到了有效富集。最后,展望了COPs在食品分析样品前处理应用中的发展方向:简单高效绿色制备方法的开发,功能化COPs的设计合成;萃取机理的研究;高通量、高灵敏度分析方法研究。这些研究将促进COPs在样品前处理领域获得更广泛的应用。     

Process Development for the Detoxification of Fermentation Inhibitors from Acid Pretreated Microalgae Hydrolysate

The aim of this study was to remove 5-hydroxymethyl furfural (5-HMF) and furfural, known as fermentation inhibitors, in acid pretreated hydrolysates (APH) obtained from Scenedesmus obliquus using activated carbon. Microwave-assisted pretreatment was used to produce APH containing glucose, xylose, and fermentation inhibitors (5-HMF, furfural). The response surface methodology was applied to optimize key detoxification variables such as temperature (16.5–58.5 °C), time (0.5–5.5 h), and solid–liquid (S-L) ratio of activated carbon (0.6–7.4 w/v%). Three variables showed significant effects on the removal of fermentation inhibitors. The optimum detoxification conditions with the maximum removal of fermentation inhibitors and the minimum loss of sugars (glucose and xylose) were as follows: temperature of 36.6 °C, extraction time of 3.86 h, and S-L ratio of 3.3 w/v%. Under these conditions, removal of 5-HMF, furfural, and sugars were 71.6, 83.1, and 2.44%, respectively, which agreed closely with the predicted values. When the APH and detoxified APH were used for ethanol fermentation by S. cerevisiae, the ethanol produced was 38.5% and 84.5% of the theoretical yields, respectively, which confirmed that detoxification using activated carbon was effective in removing fermentation inhibitors and increasing fermentation yield without significant removal of fermentable sugars.     

Adsorptive Cathodic Stripping Voltammetry for Quantification of Alprazolam

A simple and highly sensitive electrochemical sensor was developed for adsorptive cathodic stripping voltammetry of alprazolam. Based on an electrochemically pretreated glassy carbon electrode, the sensor demonstrated good adsorption and electrochemical reduction of alprazolam. The morphology of the glassy carbon electrode and the electrochemically pretreated glassy carbon electrode were characterized by scanning electron microscopy/energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The electrochemical behaviors of alprazolam were determined by cyclic voltammetry, and the analytical measurements were studied by adsorptive cathodic stripping voltammetry. Optimized operational conditions included the concentration and deposition time of sulfuric acid in the electrochemical pretreatment, preconcentration potential, and preconcentration time. Under optimal conditions, the developed alprazolam sensor displayed a quantification limit of 0.1 mg L⁻¹, a detection limit of 0.03 mg L⁻¹, a sensitivity of 67 µA mg⁻¹ L cm⁻² and two linear ranges: 0.1 to 4 and 4 to 20 mg L⁻¹. Sensor selectivity was excellent, and repeatability (%RSD < 4.24%) and recovery (82.0 ± 0.2 to 109.0 ± 0.3%) were good. The results of determining alprazolam in beverages with the developed system were in good agreement with results from the gas chromatography–mass spectrometric method.     

Phenylmethanesulfonyl fluoride pretreatment stabilizes plasma lipidome in lipidomic and metabolomic analysis

Though it is standard practice to test the stability of analytes in the matrix for routine bioanalytical method, stability evaluation is always impractical and skipped in untargeted lipidomic and metabolomic analysis because analytes in these studies are enormous, diverse and sometimes unknown. Lipidome represents a major class of plasma metabolome and shows great potential to be diagnostic and prognostic biomarkers. However, lipidome also faces stability problems because plasma contains kinds of lipid degradation enzyme. Here, using liquid chromatography time of flight mass spectrometry based lipidomic methodology, plasma levels of various lipids including triglyceride (TG), diglyceride (DG), free fatty acid (FFA), phosphatidylethanolamine (PE) phosphatidylcholine (PC), lyso-phosphatidylcholine (LPC), lyso-phosphatidylethanolamine (LPE), and sphingomyelin (SM) were dynamically determined within 4 h at ambient temperature. In mouse and rat plasma, the levels of most TG, DG, PC and PE species significantly decreased with respect to time, whereas those of LPC, LPE and FFA significantly increased with respect to time. However, such changes did not occur in human plasma, thus indicating hepatic lipase and esterase might involve in the species-specified degradation of lipid classes in plasma. Phenylmethanesulfonyl fluoride (PMSF) pretreatment prevented such lipidome instability in mouse plasma. The results suggested the instability of plasma lipidome should be highly concerned, and the enhancement of ex vivo stability of plasma lipidome could enable more reliable clinical translation of lipidomic data for biomarker discovery.     

Pretreating near infrared spectra with fractional order Savitzky–Golay differentiation(FOSGD)

With the aid of Riemann–Liouville fractional calculus theory,fractional order Savitzky–Golay differentiation(FOSGD) is calculated and applied to pretreat near infrared(NIR) spectra in order to improve the performance of multivariate calibrations.Similar to integral order Savitzky–Golay differentiation(IOSGD),FOSGD is obtained by fitting a spectral curve in a moving window with a polynomial function to estimate its coefficients and then carrying out the weighted average of the spectral curve in the window with the coefficients.Three NIR datasets including diesel,wheat and corn datasets were utilized to test this method.The results showed that FOSGD,which is easy to compute,is a general method to obtain Savitzky–Golay smoothing,fractional order and integral order differentiations.Fractional order differentiation computation to the NIR spectra often improves the performance of the PLS model with smaller RMSECV and RMSEP than integral order ones,especially for physical properties of interest,such as density,cetane number and hardness.